Ask Danny | Ep. 16: Top 5 Simple Solutions for Bathroom Maintenance

This 7 days, Today’s Home-owner Radio Exhibit co-host Joe Truini provides his Top rated 5 Easy Alternatives for the toilet.

“Today’s Homeowner” Simple Solution host Joe Truini sprays Rain-X on his shower door to remove unsightly water spots.
A glass cleaner that consists of rain repellant will avoid water spots from showing up on shower doors. (3 Echoes Information Studio)

Drinking water Spot Remover for Shower Doorways

Does your glass shower door have drinking water spots? They are a soreness to remove, and standard cleaners simply cannot do the work. Effectively, here’s a secret h2o place remover that you could previously have without the need of recognizing it!

No one wishes to wipe their shower door every time following they use it to reduce drinking water spots. And let us be straightforward — who has the time for that?

That’s why it helps to have the right software for common servicing.

I like to use a glass cleaner with a system that consists of rain repellant — like this a person. (This is an affiliate backlink. If you buy this item, we will make a small commission at no extra value to you.)

This kind of solution is generally marketed for cleaning bugs and eradicating water spots from vehicle or truck windshields, but that doesn’t indicate it only is effective on these surfaces! So seem in the automotive aisle if you just cannot discover the item in the vicinity of typical cleaners.

Now, why does this solution work around typical residence cleaners?

It’s simply because the rain-repellant system results in h2o to bead up and repel off the shower doorway. That usually means your glass shower enclosure will have no drinking water places!

Here’s how it will work: Basically spray the cleaner on the glass and use a towel to wipe it off — I usually use a cotton microfiber towel.

Now you have an effortless water spot remover! Not only is the glass cleanse, but it also repels h2o with no recognizing.

Look at: Quick Water Location Remover for Your Shower Doorway

Box of baking soda and bottle of white vinegar, seen beside a bathroom sink
Baking soda and vinegar will deodorize and clean up your sink without detrimental the bath fixture. (3 Echoes Articles Studio)

How to Clean and Deodorize Bath Sink

It’s not frequently you convey baking soda and vinegar into a rest room, but you can use them to clean up and deodorize a toilet sink.

Sinks frequently become slow-draining, and they can get clogged up with cleaning soap scum and hair. They will also produce a quite funky odor, so here’s how to get rid of that.

Start out with a person-3rd cup of baking soda. You do not have to be too exact, but you will have to have to get about a 3rd of a cup or so and dump it in the drain.

Subsequent, choose 1 comprehensive cup of vinegar. White vinegar is a really sturdy cleaning agent that you can use all more than the residence.

Just after it hits the baking soda, let it fizz down for a handful of minutes. Some people may possibly use bleach listed here, but bleach can actually consume the complete appropriate off of some bath fixtures, so you do not want to use it.

Soon after the baking soda and vinegar have calmed down a little bit, observe up with a comprehensive kettle of warm h2o. This will, in mixture with the vinegar and the baking soda, minimize by means of anything that may be clogging up the sink.

If you do this treatment as soon as a thirty day period, you will have a definitely sweet-smelling sink and a no cost-flowing drain.

View: The Quick Way to Cleanse and Deodorize Your Sink

inside of a toilet tank showing flapper valve
Flappers have two significant jobs: They present a seal for the toilet’s flush valve and control the volume of h2o unveiled into the bowl. (3 Echoes Content material Studio)

How to Change a Bathroom Flapper Valve

If you have a rest room that’s continuously jogging, the culprit is possible a leaky flapper valve. In excess of time, flapper valves might become cracked or warped, which can permit drinking water to leak out.

Here’s how to substitute it:

  • Flip the water off to your bathroom.
  • Flush the drinking water out so the tank is empty
  • Unhook the old flapper valve and snap on the new a person.
  • Alter the chain to make confident the size is suitable.
  • Turn the water again on and flush the bathroom a pair of times to make positive the flapper valve is performing correctly.

Observe: How to Exchange Rest room Flapper Valve

A handmade scrub brush drill attachment chucked into a drill is ideal for detailing tile floors. (3 Echoes Written content Studio)

How to Ability-Clean Bathtub Tiles

Scrub brushes work nicely for cleansing, but they demand a large amount of elbow grease. To change a common hand scrub brush into a electricity attachment for your drill:

  1. Minimize the tackle off a spherical scrub brush.
  2. Drill a hole in the middle of the brush.
  3. Insert a 4-inch extensive equipment bolt in the hole from the bristle aspect.
  4. Set a washer and nut on the back side and tighten it up.
  5. Chuck the bolt into a drill.
  6. Run the drill at medium pace when utilizing the scrub brush attachment.

Look at: How to Thoroughly clean Tiles More rapidly Than At any time

Using vinegar to clean a clogged showerhead.
Use vinegar and a plastic bag to thoroughly clean a clogged showerhead. (3 Echoes Written content Studio)

How to Clean up a Clogged Showerhead

Showerhead spray nozzles can become clogged more than time with mineral deposits observed in tap water.

To clean a showerhead so it sprays uniformly:

  • Area a plastic bag crammed with white distilled vinegar more than the showerhead.
  • Connect a twist tie around the showerhead arm to maintain the bag in location.
  • Allow for the showerhead to soak in the vinegar for just one to two times.
  • Eliminate the bag and turn the showerhead on total drive.

If the nozzles are still clogged, repeat the soaking approach right up until apparent.

Check out: How to Thoroughly clean a Clogged Showerhead

More Looking at

Leave a Reply